Free standard shipping on orders over $499
34 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel
If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.
From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”
As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.
Materials
Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding.
Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable.
The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable.
Power Rib™
ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.
Power Ratio
Power Ratio is the mechanical advantage of the winch and is calculated as follows:
length of handle x gear ratio
radius of drum
The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).
This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.
Features
Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip.
Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction.
The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes.
Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use.
Specifications:
Drum Ø:70mm(2-3/4")
Base Ø:125mm(4-15/16")
Height:151mm(5-15/16")
Line Entry:65mm(2-9/16")
Line Size:8-14mm(1/8 - 11/16")
Weight;4.1kg(9.0lbs)
Gear ratio 1st speed1.3 : 1
Gear ratio 2nd speed:4.7 : 1
Power ratio 1st speed:9.5 : 1
Power ratio 2nd speed:33.8 : 1
Important Note: Timely deliveries are not guaranteed from Courier Companies due to Covid-19 pandemic, delays are possible.
USPS Promotional: Calculated at Checkout Page
BestWay Promotional: $9.99 (2-7 Business Days)
Ground Promotional: $11.99 (1-6 Business Days)
2-Days Promotional: $19.99 (2 Business Days)
Next Business Day Promotional: $49.99 (Next Business Days)
Get hundreds of items for the lowest shipping rates. You will only be charged for single shipment, if you go with our Promotional Best way Shipping option during Checkout.
Shipping will be done by UPS, FedEx or USPS. Courier's standard terms, conditions and policies will be applied. Please refer to courier's website for further details. Tracking info will be emailed to you when your order ships.
Our Promotional 2-Days shipping offers all items in one package. You can order as many items as you want in a single shipment. With this shipping method, our magic shipping algorithms shop several carriers to find the best mode of transportation that will deliver your packages in two days to the 48 contiguous states. That’s a tremendous value!
This rate does not apply on Hazmat and Truck Freight items
If any item has any limit to be shipped by the carrier chosen by the customer during checkout process, Gear Ramp LLC. reserves the rights to send it via any other channel.
Hassle Free customer service is our first priority at Gear Ramp LLC. When purchasing via the Internet we realize is sometimes difficult because you are unable to visualize or interact with the product. Because of this limitation, we offer our customers / fans several return options to insure your shopping experience with us is nothing less than extraordinary.
Guarantees and Warranties:
Gear Ramp LLC. will stand behind all products we sell with regards to manufacturing defects in workmanship and material for 30 days. After 30 days defective products should be returned to the manufacturer for warranty repair. We will always do everything in our power to take care of the problem regardless of when purchased.
Please send all return requests to info@gearramp.com. Please include your order number, the item(s) you wish to return, along with the reason for the return.
Thanks for subscribing!
This email has been registered!