Free standard shipping on orders over $499
Submersible Pressure Transducer 0-3 PSI
Maretron’s submersible pressure transducers indicate tank levels and can be installed directly in the tank. Please follow these instructions to mount and connect a submersible pressure transducer to an NMEA 2000® network via a Maretron FPM100 Fluid Pressure Monitor. Maretron recommends one of two methods for mounting a submersible pressure transducer in a tank: 1) without a restraining tube, and 2) with a restraining tube.
The submersible pressure transducers are designed for a tank with a 5-hole SAE J1810 fitting at the top. Install the mounting plate with cord grip onto the transducer cable, with the rounded hex section of the cord grip facing away from the transducer.
Lower the pressure transducer into the tank such that the transducer lies at the lowest point of the tank and tighten the cord grip to secure the cable. On a tank with a flat bottom, the transducer may slide from side to side with the motion of the vessel but will not rotate due to the stiffness of the cable. It is also possible to mount the pressure transducer inside a restraining or focus tube (sold separately, Maretron part number TFT-5H).
Pressure Transducer Mounting
Connect the two wires of the pressure transducer to a free pressure monitoring channel. Connect the red wire from the pressure transducer to the channel's positive (+) terminal and connect the black wire from the pressure transducer to the negative (-) terminal of the channel. The example in Figure 1 shows the pressure transducer connected to switch channel 0, with the white wire connected to "P0+" and the brown wire connected to "P0-." Submersible pressure transducers have a small plastic vent tube in the connecting cable.
Use a Maretron DSM Series Display (firmware 1.4.7 or higher) or a PC running Maretron’s N2KAnalyzer software (version 1.4.19 or higher) to configure the connected channel(s) on the FPM100.
Supply power to the NMEA 2000 network and verify that the pressure channel indicates a valid pressure reading.
Specifications:
Important Note: Timely deliveries are not guaranteed from Courier Companies due to Covid-19 pandemic, delays are possible.
USPS Promotional: Calculated at Checkout Page
BestWay Promotional: $9.99 (2-7 Business Days)
Ground Promotional: $11.99 (1-6 Business Days)
2-Days Promotional: $19.99 (2 Business Days)
Next Business Day Promotional: $49.99 (Next Business Days)
Get hundreds of items for the lowest shipping rates. You will only be charged for single shipment, if you go with our Promotional Best way Shipping option during Checkout.
Shipping will be done by UPS, FedEx or USPS. Courier's standard terms, conditions and policies will be applied. Please refer to courier's website for further details. Tracking info will be emailed to you when your order ships.
Our Promotional 2-Days shipping offers all items in one package. You can order as many items as you want in a single shipment. With this shipping method, our magic shipping algorithms shop several carriers to find the best mode of transportation that will deliver your packages in two days to the 48 contiguous states. That’s a tremendous value!
This rate does not apply on Hazmat and Truck Freight items
If any item has any limit to be shipped by the carrier chosen by the customer during checkout process, Gear Ramp LLC. reserves the rights to send it via any other channel.
Hassle Free customer service is our first priority at Gear Ramp LLC. When purchasing via the Internet we realize is sometimes difficult because you are unable to visualize or interact with the product. Because of this limitation, we offer our customers / fans several return options to insure your shopping experience with us is nothing less than extraordinary.
Guarantees and Warranties:
Gear Ramp LLC. will stand behind all products we sell with regards to manufacturing defects in workmanship and material for 30 days. After 30 days defective products should be returned to the manufacturer for warranty repair. We will always do everything in our power to take care of the problem regardless of when purchased.
Please send all return requests to info@gearramp.com. Please include your order number, the item(s) you wish to return, along with the reason for the return.
Thanks for subscribing!
This email has been registered!